不等式约束Partial EIV模型的WHP拟牛顿修正解法及其精度评定的SUT法     

王乐洋  邹传义  吴璐璐 《大地测量与地球动力学》2019,39(6):648-653

提出一种确定不等式约束Partial EIV模型解及精度评定的新方法，在总体最小二乘准则下，将附有不等式约束的Partial EIV模型转换为标准最优化问题。采取WHP拟牛顿修正的SQP方法求解，并利用SUT法对参数估值进行精度评定，可以减小迭代次数、提高收敛速度，且精度评定方法简单有效。  相似文献   

Effect of wave nonlinearity on fatigue damage and extreme responses of a semi-submersible floating wind turbine     

《Applied Ocean Research》2019

Floating wind turbine has been the highlight in offshore wind industry lately. There has been great effort on developing highly sophisticated numerical model to better understand its hydrodynamic behaviour. A engineering-practical method to study the nonlinear wave effects on floating wind turbine has been recently developed. Based on the method established, the focus of this paper is to quantify the wave nonlinearity effect due to nonlinear wave kinematics by comparing the structural responses of floating wind turbine when exposed to irregular linear Airy wave and fully nonlinear wave. Critical responses and fatigue damage are studied in operational conditions and short-term extreme values are predicted in extreme conditions respectively. In the operational condition, wind effects are dominating the mean value and standard deviation of most responses except floater heave motion. The fatigue damage at the tower base is dominated by wind effects. The fatigue damage for the mooring line is more influenced by wind effects for conditions with small wave and wave effects for conditions with large wave. The wave nonlinearity effect becomes significant for surge and mooring line tension for large waves while floater heave, pitch motion, tower base bending moment and pontoon axial force are less sensitive to the nonlinear wave effect. In the extreme condition, linear wave theory underestimates wave elevation, floater surge motion and mooring line tension compared with fully nonlinear wave theory while quite close results are predicted for other responses.  相似文献   

A Review for the Thermophysics and the Yarkovsky and YORP Effects of Asteroidstwo     

Jiang Hao-xuan  Ji Jiang-hui 《Chinese Astronomy and Astrophysics》2019,43(1):1-22

The thermophysics of asteroids has become an important frontier for the research of asteroids in recent years. In this paper, we have introduced the thermophysical models commonly used in this field, by using these thermophysical models and combining with the data observed by the space or ground-based IR telescopes, some thermophysical parameters of asteroids, such as the thermal inertia, geometric albedo, effective diameter, surface roughness, and surface temperature, etc., can be derived. We have mentioned also the shape model and IR observation of asteroids, as well as the obtained thermophysical parameters for a part of asteroids. These thermophysical parameters can be further applied to studying the asteroids’ Yarkovsky effect, YORP effect, and so on, even can provide the relevant information for the spacecraft landing on the asteroid surface and the return mission of a spacecraft after the asteroid sampling.  相似文献   

Study on deepwater conductor jet excavation mechanism in cohesive soil     

《Applied Ocean Research》2019

Conductor casing jetting technique has been increasingly applied in deepwater drilling. The insight into the jetting excavation mechanisms is critical in guiding a successful conductor casing jetting operation. The real- time continuous jet excavation process is simulated with the volume of fluid (VOF) multiphase method of CFD (Computational Fluid Dynamics) ANSYS Fluent calculation software in the current study. The cohesive soil is modelled by using a kind of viscous fluid with Herschel-Bulkley model. In addition, a laboratory half round nozzle jet excavation test is designed for verification by comparison of the observed jet excavation profile with the numerical results. The sensitivity parameters affecting the conductor jetting excavation mechanism in cohesive soil are thus investigated. It is found that the application of Herschel-Bulkley (HB) model for cohesive soil and the VOF method of Fluent can provide a good simulation of jet excavation process. The maximum excavation depth can be determined by the undrained ultimate bearing capacity of the circular foundation with a bearing capacity factor of 6.7. The nozzle position, jet velocity and soil strength have significantly influence on the depth and width of the jet excavation profile in conductor oblique jet.  相似文献   

函数模型与随机模型双约束的GPS-InSAR数据融合方法建立三维形变场     

马艳鸽  赵丽华  张盼盼  吕佳凝 《大地测量与地球动力学》2019,39(11):1112-1117

针对InSAR技术研究地表三维形变时监测信息不足的问题，以GPS监测信息为先验信息，建立附有随机模型约束的地表三维形变模型。考虑到SAR卫星极轨方式运行导致LOS向观测量对南北向形变不敏感的问题，以GPS南北向形变观测值作为强约束，构建三维形变解算的函数约束条件。模拟数据与西安地区实测数据的计算结果表明，基于随机模型与函数模型共同约束的地表三维形变参数最小二乘解的精度优于仅有函数模型约束或仅有随机模型约束及无任何约束的参数解精度。  相似文献   

西昆仑玛尔坎苏石炭纪大型锰矿带构造背景与成矿条件     

张连昌  张帮禄  董志国  谢月桥  李文君  彭自栋  朱明田  王长乐 《吉林大学学报(地球科学版)》2020,50(5):1340-1357

西昆仑北段玛尔坎苏地区探明的大型碳酸锰成矿带，是我国近年最重要的找矿成果之一。该锰矿带构造上属北昆仑晚古生代弧后伸展盆地，其构造动力学背景为古特提斯洋向北俯冲于塔里木地块之下形成的弧盆体系。锰矿体主要发育于晚石炭世喀拉阿特河组含炭泥质灰岩夹薄层灰岩中。矿石中主要金属矿物为菱锰矿（75%~95%），次为软锰矿、硫锰矿及少量黄铁矿等。含锰岩系岩性和岩相学研究表明，玛尔坎苏锰矿带属典型的海相沉积锰矿床，其矿床成因可能与晚古生代半局限盆地沉积和海底热液活动有关。海底热液活动可能为成矿提供了丰富的物质来源。含锰岩系元素和同位素地球化学特征表明，玛尔坎苏锰矿沉淀时的水体环境为常氧条件，而矿层下盘（部分）岩系的岩性及地球化学特征反映其沉积时的水体环境为低氧—贫氧条件。玛尔坎苏锰矿带锰矿石具有负的δ¹³C值（-23.3‰~-10.0‰），推测有机质导致的还原作用是该锰矿由原生氧化锰在成岩期转化为菱锰矿和形成富锰矿的重要机制。  相似文献   

一种基于M估计的Robust-ELM滑坡位移预测方法     

高彩云  高宁 《大地测量与地球动力学》2019,39(2):153-157

采用传统ELM算法进行滑坡位移预测时，其网络输出权值由最小二乘估计得出，导致ELM抗差能力较差，从而造成网络训练参数不准确。为此，将M估计与ELM相结合，提出一种基于M估计的Robust-ELM滑坡变形预测方法。该方法利用加权最小二乘方法来取代最小二乘法计算ELM输出权值，以减少滑坡监测数据中粗差对ELM预测的干扰。分别以链子崖、古树屋滑坡体为例，将Robust-ELM进行了单维、多维粗差的抵御性验证。结果表明，该方法能够有效降低粗差对预测的影响，具有良好的抗差能力。  相似文献   

尼日尔三角洲东部深水区构造特征及其形成机理     

赵江  王秋良  卢圣力  付博  杜峰 《大地测量与地球动力学》2019,39(7):691-695

研究尼日尔三角洲东部深水区块发现，整个盆地从陆向洋具有3个大的构造分区：伸展拉张区、过渡区和挤压逆冲区。伸展区以大型同沉积断层伴生大量滚动背斜构造为特征，过渡区发育大量泥底辟构造，挤压区以复杂的逆冲叠瓦构造为主。通过分析形成机理，揭示东部深水转换带上M研究区构造特征，按构造的演化特征将该区构造分为泥底辟型、冲断-泥底辟混合型、逆冲型3种类型，提出研究区内的圈闭主要以构造-岩性圈闭为主，为尼日尔三角洲盆地深水勘探提供新的理论指导。  相似文献   

可可西里岩石圈向北俯冲到柴达木地幔的地震学证据          下载免费PDF全文

赵荣涛  赵文津  史大年  刘志伟  杨艳 《地球物理学报》2020,63(8):2940-2953

利用中美德INDEPTH IV合作项目2007—2009年间布置于青藏高原中、北部140个宽频地震台站记录到的天然地震数据,经过接收函数成像处理,获得了3条穿过昆仑—阿尼玛卿缝合带清晰的壳幔结构图像.结果显示柴达木南缘莫霍面位于约50 km深度,羌塘地块、可可西里地块、东昆仑造山带莫霍面位于约65 km深度,昆仑—阿尼玛卿缝合带以北约50 km存在莫霍面深度突变.在可可西里和柴达木岩石圈地幔之间观测到北倾界面,这可能是可可西里岩石圈向北俯冲到柴达木地幔之下的证据.可可西里地块地壳内宽缓的负转换震相带是低速带的反映,其向北挤入到东昆仑山下发生挤压增厚,可能是东昆仑山隆升的原因;由于刚性柴达木岩石圈的阻挡,物质向东改向,则可能是该地区向东旋转的构造应力场产生的原因.本文研究结果不支持亚洲岩石圈地幔在东昆仑—柴达木交界处向南俯冲,据此,我们提出了新的东昆仑造山模式.  相似文献   

Numerical homogenization-based seismic assessment of an English-bond masonry prototype: Structural level application     

Luís C. Silva  Paulo B. Lourenço  Gabriele Milani 《地震工程与结构动力学》2020,49(9):841-862

A multiscale strategy is evaluated at a structural level for the analysis of unreinforced masonry structures. The mechanical characterization of the masonry is deduced from homogenization-based micro-scale finite element (FE) models. The derived data are here employed at a structural level via a discrete FE model. The discrete FE model is composed of quadrilateral rigid plates interconnected through vertical and horizontal interfaces. On the interfaces, between adjoining discrete elements, a model that accounts for the in- and out-of-plane behavior of masonry, with damage and plasticity, is adopted. Such interfaces represent the material pre- and post-peak regimes, its orthotropy, and, depending on the micro-model assumed, account by three-dimensional shear effects that are especially important for multi-leaf walls and complex regular textures. The discrete model has been implemented in an advanced structural analysis software where powerful built-in features as the arc-length method, line-search algorithm, and implicit or explicit solver schemes are available. The multi-scale model is applied for the dynamic study of a small English-bond masonry house prototype subjected to a series of consecutive earthquake records. Detailed comparisons between the experimental and numerical data are presented, including the results obtained through a continuous total strain rotating crack model. Quasi-static and dynamic analyses are conducted. Results demonstrate that when enough experimental information is available on the masonry components under tension, shear, and compression regimes, the approach predicts well the seismic structural response in terms of time-history displacements, seismic capacity, and damage patterns. The required computational cost (CPU time) is very attractive.  相似文献